Laiwu Luda Water Pump Equipment Co

The series of mud pumps, fish pond mud pumps and mixing mud pumps have the advantages of advanced design concept, reasonable structure, excellent material selection, reliable operation, convenient maintenance, small hydraulic loss, high efficiency, low use cost, etc., and are widely applicable It is used to transport abrasive or corrosive slurry, especially power plant ash, in industrial sectors such as coal, steel, mining, placer, printing and dyeing, coking, metallurgy, gold mining, building materials, electric power, ceramics, petroleum, drilling, tunneling, construction, and chemical industry. . Conveying abrasive and corrosive slurries containing solid particles, mortars with maximum weight concentration of solid-liquid mixtures, ore slurries.
Type mud pump, fish pond mud pump, mixing mud pump usage conditions
The source is or/> three-phase AC power supply, and the capacity of the distribution transformer is times the rated capacity of the motor.
The mass temperature shall not exceed ℃, and the type shall not exceed ℃ (the maximum temperature shall not exceed ℃ and does not contain flammable and explosive gases.
The maximum weight concentration of solid particles in the mass of ash and slag is , and the slag is .
The diving depth of the group is not greater than meters, and the minimum diving depth is subject to submerging the motor.
The working position of the group in the medium is vertical, with the upper part suspended.
Type mud pump, fish pond mud pump, Scope of application of mixing mud pump
Take yellow sand from the bottom of rivers, rivers, lakes, seas, etc.
Take silt and sand from the bottom of rivers, rivers, lakes, seas, reservoirs, fish ponds, power plants, etc.
Take the powder slurry from various stone processing plants.
Sand transportation, various tailings, slurry, slurry, coal slurry, slag, slag treatment, etc.
Take all kinds of water slurry processing Solid slurry items.
Take mud and sand from caissons and water wells.
Clean sedimentation ponds, hydropower stations, reservoirs, rivers, steel plants, power plants, caissons, mines, and fish ponds.< br/> Get various power plant fly ash, coal slime.
Get various emery, quartz sand, steel slag, cinder solid particles.
Send sediment, slurry, coal slurry containing larger solid particles , sand and gravel and other media.
Jinsha, pumped iron sand.
One-year warranty/wooden box packaging, in stock, can be customized, call us for details!
For details, please call
Friendship Tip
) Only the closed system has outlet pressure, the outlet pressure of the open system is
) The motor power of the water pump is calculated based on the medium concentration (medium density), and should be rechecked when used for higher concentration transportation.
) When the medium cannot submerge the motor, a cooling cover should be used for forced cooling, cooling water pressure, and cooling water flow rate cubic per hour.
) A valve should be installed at the outlet of the water pump. When the water pump is started, the valve should be closed and then the motor started. After normal operation, the valve should be gradually opened.
) When shutting down, you must first close the valve and cut off the power supply to prevent serious damage to the water pump caused by water hammer in the pipeline.
) In order to prevent pipeline blockage, clean water should be supplied for a period of time to flush the pipeline before shutting down until clean water flows out of the water outlet.
Caliber